Practical-instrument-electronics 521 Uživatelský manuál stáhnout pdf

Practical Instrument Electronics

Model 520/521

T/C Simulator(s)

Operating Instructions

Basic Keypad Operations

1 EZ-Check™ Switch

Slide the switch to select from three user stored values

for the desired calibration points. The User can select HI,

DIAL and LO positions. These values can easily be

changed to suit the calibration requirements.

2 ON/OFF Switch

Slide the ON/OFF Switch to turn the Model

520/521 on or off.

3 EZ-Dial™ Knob

The EZ-Dial™ Knob has two adjustment

speeds. Simply turning the EZ-Dial™ Knob will

select fine adjustments. While pressing down

and turning the EZ-Dial™ Knob will make

course adjustments.

Note: When the EZ-Check™ Switch is in the

HI or LO position, pressing and holding the EZ-

Dial™ Knob without turning

will store new HI

or LO values.

Model 520/521 Configuration

Instructions for Enabling and Disabling the Configuration Options

1. Turn the Model 520/521 on with the ON/OFF Switch2.

2. Press the EZ-Dial Knob

3 while the “PRESS EZ-DIAL KNOB FOR

CONFIGURATION” message is displayed.

3. Select options by turning the EZ-Dial Knob until the arrow points

to the desired option.

4. The option can be enabled or disabled by tapping the EZ-Dial

Knob.

The Model 520/521 configuration menu will exit automatically after 5

seconds of inactivity and go to normal operation with the options selected.

These options are recalled at turn on until they are changed again.

841 Holt Road #1 • Webster, NY 14580 Tel: 585-872-9350 • Fax: 585-872-2638 [email protected] • http://www.piecal.com/

520/521-9002 2/25/04 1-4

1 2 3 4

Shrnutí obsahu

Strany 1 - T/C Simulator(s)

Practical Instrument Electronics Model 520/521 T/C Simulator(s) Operating Instructions Basic Keypad Operations 1 EZ-Check™ Switch Slide the switch

Strany 2 - Operating Instructions

Model 520/521 Operating Instructions Model 520/521 Configuration Model 520/521 Configuration Menu Auto Off ON (default)/OFF If Auto Off is ON,

Strany 3

Model 520/521 Operating Instructions Connection Diagram Two Wire Connection to Transmitter Specifications General Specifications: (Unless otherwi

Strany 4

Model 520/521 Operating Instructions 841 Holt Road #1 • Webster, NY 14580 Tel: 585-872-9350 • Fax: 585-872-2638 [email protected] • http://www.pi

Příbuzné modely 520

Komentáře k této Příručce

Žádné komentáře

Practical-instrument-electronics 521 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Nástroje Practical-instrument-electronics 521. Practical Instrument Electronics 521 User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely 520

Komentáře k této Příručce

Související produkty a manuály pro Nástroje Practical-instrument-electronics 521